What does your butterscotch look like? Mine is close... but not. Oh well. I will stick to my shredders and leave teles to the pros.
Friday, October 29, 2010
Thursday, October 28, 2010
Finishing the unfinished
Coated in oil and hanging around to dry.
A week later. The oil is finally dry. I have sanded the guitar up to 2000 grit using wet/dry paper and mineral spirits. It will take another day for the mineral spirits to gas off. Then we start on the final finish.
The padauk is all one color now. The oil darkened everything significantly.
The ribs of the maple are very visable now.
Truss rod cover made.
A week later. The oil is finally dry. I have sanded the guitar up to 2000 grit using wet/dry paper and mineral spirits. It will take another day for the mineral spirits to gas off. Then we start on the final finish.
The padauk is all one color now. The oil darkened everything significantly.
The ribs of the maple are very visable now.
Truss rod cover made.
Working on Tres Teles
Friday, October 15, 2010
S907 #2 playing
Last few things for S906
V Finishing up
I had to recess the string-thru ferrules to match the recessed bridge. Used a veritas bull nose rotary file. I like the way it looks...
Boring finishing photos. These are the initial coats of tru-oil. Once I get a color and feel I like I will sand it all flat. I am not sure what level gloss to use on this one. The high gloss looks really good but I originally planed on a satin finish. I wasn't even planning tru-oil but I used the initial coat of thinned tru-oil to even out the color. It looked so good I decided to throw a coat or two on it. The amber tint enhances the grain. Once the finish is flat I will make a decision on final finish. I might seal it with a coat of shellac and throw a few coats of lacquer on it for good measure.
Boring finishing photos. These are the initial coats of tru-oil. Once I get a color and feel I like I will sand it all flat. I am not sure what level gloss to use on this one. The high gloss looks really good but I originally planed on a satin finish. I wasn't even planning tru-oil but I used the initial coat of thinned tru-oil to even out the color. It looked so good I decided to throw a coat or two on it. The amber tint enhances the grain. Once the finish is flat I will make a decision on final finish. I might seal it with a coat of shellac and throw a few coats of lacquer on it for good measure.
Subscribe to:
Posts (Atom)