Sunday, April 3, 2011

S906_3 fretboard

After numerous tests on the prototypes I think it is time to use the T-88 on this one. Remark and check the center-lines.

Drill pins for fretboard.

Pre-heat the epoxy in the driveway. Then mix, spread, clamp. The great thing about T-88 is the long open time. After I mixed up the batch I realized I had forgotten to tape the face of the fretboard and the sides of the neck. With titebond it would have been to late but with T-88 I had time to tape everything up, get a swig of coffee, and put my nitrite gloves on. Good stuff.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.