Sunday, March 14, 2010

V Neck

Putting the headstock together. This is going to be a headstock scarf with a front and back plate.



Not rocket science to getting clean joints but I tell you wenge glues up nice and clean. I use the tape to stop the creap when I glue the pieces together. I always leave the headstock too thick so this time I am making it thin (really the exact thickness it needs to be) After I glue the wings on it will get a headstock plate.




So it looks overly long but I will trim the headstock and use the excess for the wings of the headstock.


Trimmed up the body. Still have a few ideas on the top.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.